Importance Of Process Tank And Pickling Plants In Hot Dip Galvanizing Plant

There are multiple objects and plants in the hot-dip galvanizing plant. Considering the process tank and pickling plants they serve the special purpose to make the plant. First of all, to know the galvanizing plant, it is used to galvanize the tube, structure, and pipe.

Process tank or pickling plants are the units of pre-treatment tanks, they are made of the same design with the solid steel construction and industrial plastic. Considering the process of cleaning, curing, painting of a product for the galvanizing, these tanks can help for the disposal of solid waste in the form of pigments.

Consisting the premium quality material and robust design, these pre-treatment tanks are highly reliable. Arvind Corrotech as a process tank manufacturer, Ahmedabad, India provides a comprehensive solution as a specific size pre-treatment tank for pickling, rinsing, and fluxing as well.

Purpose Pickling Plants For Galvanizing The Material

The hot-dip galvanizing plan at the diffusion response among molten zinc and naked metal.

There are multiple stages as the process tank is the most important.

• The pickling tank or process plant is used to remove the rust from the metal. Before it goes to the galvanizing process this process is important to do. Why? Because the rust diffusion-reaction only happens when the surface of the metal or immersed steel is perfectly clean.
• The metal should be entirely free from grease, oil, metal oxides, rust, and mill scale. Pickling plants consist of acid and it cleans the surface of the steel to make it relatively smooth and free from the major defects.
• A good pickling plant supplier, exporter make the tank as for the cleaning operations before the galvanizing process. This step helps to create the uniform galvanizing material coating with adequate.
• It can help make the coating uniform, not thick, not excessive, or not less.
• After using the degreasing tank, removing the oil and grease from the metal it is required to remove the rust from the metal is required. The thin layer of the iron oxide should be removed before galvanizing.

At Last,

The pickling tank is used before the pre-fluxing process and after degreasing process, and the acid pickling can help to remove the iron oxide from the surface to expose the required area and permit a coating of the molten zinc bath.  The good manufacturer of hot-dip galvanizing plants provides a good process tank, for the cleansing operations. It can help to remove dirt, oil, grease, keep oil, and soluble markings for reducing and caustic cleansing.