Why Pollution control equipment is necessary with Galvanizing plant?

The environment engulfing us is an integral part of life’s sustenance. It’s important to protect it.   Many factories and plants in the process of making useful products cause pollution. But In Galvanizing plant setup, steps are taken to reduce the environmental impact of the plant which can pollute the air. To control the effect of Air pollution from the waste produced from the plant, Galvanizing Plant Manufacturers follow Air Pollution Control technology.

Benefits of Pollution control equipment

These Pollution control equipment have so many benefits that only help galvanizing plants to survive for longer period:

1. It Minimizes the risk and health hazards of workers.
2. It Increases the life of roof structures and cranes by eliminating corrosion from the equipment and machines.
3. This equipment is designed to prevent unpleasant odours coming outside of the tank.
4. This helps in increased productivity causes very low emission of particulate matter.
5. Eliminates white fumes from the shop floor
6. Maintain a neat and clean workplace
7. Eliminates air pollution coming out of the plant, it is Environmentally friendly

With every galvanizing Plant setup, there are types of equipment assembled for the purpose to control pollution from the plant.

Pollution Control Equipment

Plants produce many different kinds of waste during the Galvanizing process and the solution for it is Pollution Control Equipment, which is of many types, depending on the kind of waste plant is producing.

• Fixed Fume Enclosure

  Fixed fume enclosure system is completely safe with enclosed electrics and acid-resistant paint with a two-stage opening. It is robust and highly reliable.
  
  

• Acid Fume extraction system
  
  
  

  It is Designed for Zero Discharge and Clean Air emissions. Every hot-dip galvanizing plant produces a significant amount of Acid fumes. To prevent these toxic fumes from spreading on the floor and causing pollution, the Acid Fume Extraction system absorbs these fumes from the pickling tanks.
  
  

• Zinc Fume Extraction System

  It Ensure Safe and Efficient Zinc Fume Abatement. The hot-dip galvanizing process produces white fumes that are exceedingly dangerous due to the presence of chlorine and dangle ash particles when steel is dipped in the melted zinc. Hence, this zinc fume extraction system prevents white fumes from traveling out in an open environment.
  
  

• Encapsulated Pickling Rooms

  It has an Innovative and Efficient Acid Fume Abatement System. The acid abatement system encloses the acid tank in a separate room. The enclosed room separates the process area where acid fumes are produced from the surrounding operational areas.
  
  

• Dust Collector filter system

  A dust Collector system is a simple tank with no moving parts is used for the separation of dust by blowing air in the tank and removing dust particles in a separate area.
  
  

• Wet Scrubbing system

  After the removal of dust particles, the fumes are now passed through a wet scrubber. Wet scrubbers are used to scrub the air streams by eliminating toxic particles using water.

The environment is above all

Galvanizing plant manufacturers in India make sure that Air pollution equipment and technology are integrated with the plant setup. It is necessary to eliminate the plant waste.